|
Tascam MH-40 MkII
Multi-Headphone Amplifier
|
|
The MH-40 MKII has been designed to drive
up to 4 pairs of stereo headphones from a single line-level stereo signal.
Individual level controls allow each performer or listener
to set the
headphone sound to his or her individual preference. Maximum
output power of 1.5 W + 1.5 W provides sufficiently high headphone levels
to make
high-quality sound available and mask external noise – even when monitoring
in a high-sond-level studio environment. More than one MH-40
MKII can be cascaded for 8 or more headphone outputs.
Main features
|
 4 high-level stereo headphone outputs with individual level controls
Signal input from front or rear side (switchable)
Mono or stereo operation
|
|
Multiple units can be cascaded
Internal power supply (no adapter needed)
1U rack-mountable chassis
|
Specifications
| General |
|
Frequency response
|
|
20 Hz - 20 kHz
(+0 dB, -1.5 dB)
|
|
Signal-to-noise ratio
|
|
100 dB (IHF A-weighted,
input level control min.)
|
|
Channel separation
|
|
80 dB between adjacent channels
|
|
Line input
|
|
Front: 6.3 mm jacks, unbalanced
Rear: RCA connectors, unbalanced
|
|
Input impedance
|
|
40 kOhm
|
|
Nominal level
|
|
-10 dBV (0.3 V)
|
|
Headphone outputs
|
|
four 6.3 mm stereo jacks
|
|
Maximum output
power
|
|
2 x 1.5 W at 8 Ohm (1 channel in use)
2 x 1,2 W an 8 Ohm (four channels in use)
|
|
Power supply
|
|
230 V AC, 50 Hz
|
|
Power consumption
|
|
10 W
|
|
Dimensions (W x H x D)
|
|
482 mm x 44 mm x 196 mm
|
|
Weight
|
|
4 kg
|
Design and specifications subject to change without notice.
|
