Tascam IF-TAD TDIF/ADAT Format Converter

Price

Tascam IF-TAD
TDIF/ADAT Format Converter

The IF-TAD simply converts between lightpipe and TDIF formats. This enables users of both formats to connect their devices digitally. The IF-TAD can be used to connect an ADAT recorder to a digital mixing console which features TDIF I/O, transfer audio between ADAT and DTRS machines, or any other digital format application you can think of.

Main features

Transfer up to eight channels of digital audio data between digital audio devices

TDIF-1 port allows connection of DTRS compatible machines

Lightpipe input and output allow connection of ADAT optical devices

Data may be transferred in either direction, or in both directions simultaneously

Supports standard sampling frequencies of 44.1 kHz and 48 kHz

Word clock output (derived from ADAT signal)

Word length up to 24 bits

Signal LEDs for visual indication of link status

Specifications

General
TDIF-1 interface		Bi-directional 8-channel, conforms to TDIF-1 specifications
TDIF LED		Lights orange when valid TDIF data received
ADAT IN		Optical, 8-channel input conforms to ADAT specifications
ADAT OUT		Optical, 8-channel output conforms to ADAT specifications
ADAT LED		Lights orange when valid data received at the ADAT IN
WORD SYNC OUT		BNC, 75 Ohm
Supply voltage		9 V DC (via PS-P414 only)
Power consumption		6 W
Power supply (PS-P414)		230 V AC, 50 Hz
Dimensions (W x H x D)		191 mm x 38 mm x 116 mm
Weight		750 g (without PS-P414)

Design and specifications subject to change without notice.