EMG-45TW
Inside the EMG-45TW pickup are both single and dual-coil pickups,
each with its own output. The single-coil mode is a new version
of our EMG-J pickup built in the CS (ceramic and steel). The
dual-coil mode is our popular CS dual-coil consisting of two
coils opposite one another creating a pickup similar to model
45CS. A push/pull volume (or tone) pot allows you to change from
the clarity of a single-coil to the fatness of a dual-coil. The
45TW can be used with any of EMG's tone enhancing circuits on
either pickup output. This pickup uses a 45 Extended housing
that is 4.5 inches (115mm).
When using two of the TW Pickups in the same instrument it is
not recommended that BT or BQ Systems be used. Each pickup requires
a push/pull pot for switching from single coil to dual coil so
the balance control included with the system can?t be installed.
If you want to use the balance control, consider switching single/dual
coil outputs with a DPDT toggle switch(s) instead.
Options Available: ONLY AVAILABLE IN BLACK
|