Rode microphones.
Features

• Class A valve circuitry

• Dedicated Power Supply

• 6072 Twin Triode

• New "edge-terminated " 1"Gold sputtered Diaphragm

• Custom designed JENSEN Transformer

• -10dB and -20dB Pads (Switched from power supply)

• 2 position High Pass Filter (switched from power supply)

• 9 polar patterns (switched from power supply)

• Double Shielded Oxygen Free Copper Multicore Cable with custom designed heavy duty plugs and sockets.

Rode microphones.
CLASSIC II

From its custom designed Jensen transformer to the dual pressure gradient transducer this valve microphone is a Classic.

Machined from solid brass, hand polished,glass bead blasted and coated in satin nickel,this is a microphone with Class A valve circuitry that gives unmatchable warmth,clarity and sensitivity when critical vocal and instrument recording is required.

The Classic II when a Classic performance is needed.

Rode professional recording microphones

  Rode microphones

Accessories included:
• The Classic II is supplied complete with Power Supply, 10m (30ft) Cable, SM2
• Shock Mount Suspension, M2 Stand Mount 3/8"-5/8" Thread Adaptor.
• Custom Aluminium Flight Case.

Specifications

Capsule: Externally polarised dual diaphragm 25mm (1") condenser
Active Electronics: Thermionic impedance converter
Pickup Pattern: Switchable Omnidirectional / Cardioid / Figure-8 in nine steps
Frequency response: 20 Hz-20 kHz
High Pass Filter: Switchable: flat, -15dB @ 20Hz, -21dB @ 20Hz. Cascaded first-order filters
Output Impedance: 200
Sensitivity: -37dB re 1volt/pascal (14mV @ 94dB SPL) +/-2dB
Equivalent Noise: <18 dBA ("A"-weighted per `IEC268-15)
Maximum Output: +2dBu (@ 1% THD into 1K)
Dynamic Range: > 113dB (per IEC268-15)
Maximum SPL: 131dB SPL (@ 1% THD into 1K)
Signal/Noise Ratio: > 76dB (per IEC268-15)
Power Requirements: Dedicated Power Supply (110 ~ 120V/220 ~ 240V, 50/60 Hz) Packed Weight 8.7kg (Mic only 1.044kg)

Rode professional recording microphones