|
Acoustic
Principle: Externally polarised single diaphragm condenser
transducer
Capsule Size:
0.5” (13mm)
Active Electronics:
JFET Impedance converter with bipolar output buffer
Directional Response:
Cardioid
Frequency Response:
20Hz to 20kHz
Sensitivity:
-38 dB re 1v/Pa ± 2 dB equivalent to 12mV/Pa where 1 Pa
= 94dBSPL
Equivalent Noise:
<16 dBSPL, (A-weighted per IEC268-15).
|
Maximum
Output: +13.9 dBu @ 1% THD into 1k_
Dynamic Range:
>128 dB
Maximum SPL:
143 dB @ 1% THD into 1k_
Signal to Noise:
78dB
Power Requirements:
4 mA, P48 Supply (38V–52V) 2 mA, P24 Supply (20V-26V) The
microphone operates in accordance with the above specifications
to a minimum of 18V. It will operate with some performance
degradation below 18V.)
Packed Weight:
1.8kg (Mic only 100g) |
