Specification
Acoustic principle: Externally polarised 25 mm (1")
dual
diaphragm
Active electronics: J-FET impedance
converter with bipolar output buffer.
Pickup pattern: Multi-pattern (see graph)
Frequency Response: 20 Hz ~ 20 kHz (see graph)
Output impedance: 200 ohms
Sensitivity:-36 dB re 1 Volt/Pascal (16 mV @ 94dB SPL)
+/- 2 dB
Equivalent noise: 7 dBA SPL (per IEC651, IEC268-15)
Maximum output: + 15 dBu (@ 1% THD into 1kohm)
Dynamic range: 136dB (per IEC651, IEC268-15)
Maximum SPL: 147 dB (@ 1% THD into 1K ohm)
Signal/Noise: 84 dB (1kHz rel 1 Pa; per IEC651, IEC268-15)
Power requirements: Phantom P48 or P24 Volts.
|
