T-Rex power supply for
effect users. This is the classic FuelTank that has 3
different output sections: 9 volt DC, 12 volt DC and 12
volt AC. Each section is isolated.
Running on full
No more batteries to change. No more tangled cables to
trip over. FuelTank is the perfect power supply unit for
guitarists who want to focus on their performance, not
their gear.
Delivering
1.500 mA through ten DC plugs, FuelTank powers all your
pedals – keeping
you running on full power night after night.
With a compact design, FuelTank fits conveniently every
pedalboard including the T-Rex ToneTrunk effect board.
And it comes with all the cables you need to get you up
and running. The dimensions of the FuelTank are:L:15,8
cm H:3,8 cm W:7,6 cm
Pure power
FuelTank
delivers 1.500 mA of reliable power. Two of the ten
outputs provide 12-volt power
with isolated ground – one
DC and the other AC, for AC pedals.
Video
Lars, the Creative Development Director at T-Rex Engineering,
talks about the FuelTank Classic and how to avoid hum
loops.
Features
• MAINS input power plug,
3-pin standard plug
• Voltage selector, 115/230 volts
• eight 9-volt DC output plugs, all sharing the same ground.
Giving a total of 500 mA
• one 12-volt DC output with isolated ground, giving 500
mA
• one 12-volt AC output with isolated ground, giving 500
mA
• Blue LED when unit is ON
• Slow burning fuse 250V 250mA
Includes
- One 5-connector link cable/daisy chain for the DC outputs
- Eight black extension cables for the DC outputs, length
25 cm
- ten black extension cables for the DC outputs, length
50 cm
- two red extension cables for the 12-volt AC output,
25 cm
- one standard mains power cable
Listen up, there is a lesson to learn!
When you want to power your pedal from the FuelTank
Classic or any other power supply, there are two things
you need to know about your pedal:
1. What voltage does your pedal accept to be driven?
You need to find this information in the pedal users
manual or on the pedal. Most pedals today accept 9 or
12 volt. Some need 18 volt. If there is a battery container
in the pedal it usualy just needs 9 volt, but often it
also accepts 12 volt.
All T-Rex pedals can run on 12 volt. Some (the ones with
battery container) can also run on 9 volt. But they accept
any voltage between 9 and 12 volt.
If your pedal get's less than the voltage it needs, there
is no danger. It will not break or burn. It just sounds
different or says nothing at all. Some musicians even
use old batteries, that gives less power and therefore
the pedal gives another sound - which they like.
If your pedal get's more voltage than it needs, there
is danger that the pedal will break or even burn. If you
are lucky, it will have a fuse inside (to be replaced),
but most pedals don't.
2. How much power does your pedal consume?
You need to find this information in the pedal users
manual or on the pedal in terms of a sticker, if you are
lucky. If your pedal has a battery container, it usually
consumes very little power, like 20 - 40 mA. If your pedal
comes with an adapter, it consumes a lot more power. That
can vary from 100 mA to 1.200 mA, or even more.
Now you are ready to buy and connect your pedal(s) to
a power supply.
If you have a combination of pedals that accept 9 or
12 volt, you have come to the right place, FuelTank Classic.
The Classic even gives 12 volt AC, if you have a pedal
that needs that kind of voltage.
If you have more pedals that accept 9 volt and together
uses less than 500 mA, you can run them all from one output
on the Classic 9 volt section - by using the link cable.
One end of the link cable goes in one of the 9 volt outputs
on the FuelTank Classic. The other plugs on the link cable
goes into the pedals one by one. The order is irrelevant.
If you have more pedals that accept 12 volt and together
uses less than 500 mA, you can run them all from the 12
volt DC output on the Classic - by using the link cable.
One end of the link cable goes in the 12 volt output.
The other plugs on the link cable goes into the pedals
one by one. The order is irrelevant.
If you have a pedal that accepts 12 volt, but consumes
more than 500 mA. You cannot use the FuelTank Classic.
You need the FuelTank JuicyLucy and the green current
doubler cable, that comes with the JuicyLucy. This cables
goes from two outputs on the JuicyLucy to one input on
your pedal.
If you have a pedal that only accepts 18 volt, you cannot
use the Classic. You need the FuelTank Junior and the
yellow voltage doubler cable that comes with the Junior
- if your pedal consumes less than 120 mA, else you cannot
use the Junior.
If you have a pedal that accepts 12 volt AC and consumes
less than 500 mA (like the T-Rex Replica), you simply
connect it to the AC output on the Classic using the red
cable.
Notes.
Please note that a lot of 9 volt pedals on the market
accepts 12 volt. Lot's of people are not aware of this,
because they usually juts use a 9 volt battery to drive
the pedal or a 9 volt power supply.
Please note that all FuelTanks and all T-Rex pedals have
minus as center, which is normal on the market. That means
the center pin in the DC plugs. Very few pedals use the
opposite: Center pin is positive. If you have a twisted
pedal like that, you need to find a changer cable somewhere
on the market, if you want to use a normal power supply,
that has minus as center.
Please note the power distributors on the market. People
and manufacturers call them power supplies, even though
they are not. They don't have a transformer core inside.
They are usually feeded by an adapter and the power is
then just distributed in the box to more output plugs
- sometimes in different voltage. Often all outputs share
the same ground, which can give noise.
T-Rex FuelTanks are all real power supllies with real
transfomers inside, developed in Denmark and produced
by a Danish transformer company, that works together with
T-Rex.
Any of the FuelTanks meets the demands for a modern power
supply. Solid design, no noise, lots of outputs, cables
included, variable mains input (115/230 volt), input fuse
inside.