Vocal Harmony & Effects for Guitarists
Are you looking to turn heads at every gig and rehearsal with your singing? You will with VoiceTone Harmony-G, the smartest vocal harmony and effects device you’re likely to plug your guitar and mic into. Harmony-G simultaneously gives you two backup harmony singers and realistic vocal doubling with effortless control. Not only that, but Harmony-G also includes adaptive live engineer effects that can automatically optimize your vocals, guitar sound and effects for you. While you focus on your music, Harmony-G supports you with a fully produced vocal sound.

Easy Harmony Generation
Harmony-G has a good ear for music. It listens to your performance and decides what harmony notes would sound best with your song. All you have to do is choose one of the presets, then play guitar and sing. No special pickups, pre-programming, or extensive musical knowledge are required in order to use Harmony-G.

Automix For Your Acoustic Guitar
Put away your mixer if you play acoustic guitar and sing. Harmony-G can mix your guitar sound into its main output which can go directly to your powered PA speakers. There is a guitar level control that has a selectable all-new feature called Automix that will automatically balance your guitar so it never overpowers your voice. You can even share the vocal reverb effects with your guitar to produce a complete, produced sound.

Preset or Programmed: Your Choice
The factory presets were designed to cover many situations but when you want to customize, you can. You can adjust the effect type, the arrangement of voices above and below your voice (voicing), Doubling on/off and even set up Manual mode to temporarily override the guitar sensing and use a fixed scale for harmony. Your custom presets can be stored for use later.

One Sound Or Many: Your Choice
Many people will be happy with one sound all of the time and can simply use the On button to turn on the harmony voices when needed. Others may want to use different sounds in their performance and Harmony-G has several ways to do this. Each preset has an A and B setting selected with the A/B footswitch so you can set the main part of the song to A and then the bridge of that song to B. If you want more sounds, you can advance and cycle through your presets with the A/B footswitch to access up to 20 different combinations.

Live Engineer Effects With The Tone Button
VoiceTone Correct started the trend towards singers defining their own EQ and compression and now you can have that same smooth, adaptive vocal tone in Harmony-G. There’s nothing to set. When you activate the Tone button, the adaptive features will assess how to set your EQ curve and adjust compression so you sound the best you can. There are 3 alternate settings to choose for special circumstances but generally, it’s set and forget.

Rich Effects To Choose From
Six easy-to-access styles of pre-programmed Reverb, Delay and modulation effects are available to add ambience to your voice and your harmony voices. Additional styles can be accessed by pressing and holding the FX button.