Dimensions:
19"w x 1.5"h x 5.25"d (6.25"d overall)
Weight: 5 lbs.
OPTIONAL
ACCESSORIES
Alternating
(On/Off) Footswitch
(Model #FSPL)
The SansAmp RPM is a versatile instrument pre-amp with parametric
equalization and SansAmp technology. This single space rackmount
model was adapted from our SansAmp Acoustic DI pedal, with the addition
of a Drive control, and redesigned as an expanded multi-instrument
tool. With a sweepable, semi-parametric EQ and variable gain, the
SansAmp RPM is a supercharged tone shaper for any signal source.
Partner it with a SansAmp RBI for the ultimate bass pre-amp system,
or with a SansAmp PSA for total domination.
RPM
ADDITIONAL FEATURES
Drive
adjusts the overall amount of gain and overdrive.
Active
Bass and Treble controls cut or boost ±12dB
Mid
Shift is a parametric EQ control which allows you to select
the center frequency of the Mid control. Its sweep ranges from
170 Hz to 3.0 kHz. This, then, enables you to notch out any
specific frequencies that may be causing your instrument to
feed back. Mid
is also an active tone control, cut or boost ±12dB.
Blend
allows you to mix the direct instrument signal with SansAmp
Tube Amplifier Emulation circuitry. Individual
Level control for the XLR out to optimize your amp's output
relative to the P.A. system. Effects
Loop with Mix 50/50 switch to configure in series or parallel.
1/4"
rear input and XLR output with selectable levels.
Buffered
uneffected XLR output to run a dry signal to a separate channel.
Footswitch
input to engage unit.
Footswitch
output to chain and toggle between another SansAmp RPM or SansAmp
RBI.
