|
The Tech 21 ARMD MIDI Converter enables you to control the footswitch
functions of Tech 21's Trademark Series of multi-channel guitar
amplifiers and Landmark Series of Bass amplifiers with any
MIDI controller.• Trademark
60
• Trademark 120
• Trademark 300
• Landmark 300
• Landmark 600
You
simply connect a standard 5-pin MIDI cable from the MIDI out on your MIDI
controller to the MIDI In of the ARMD. Then connect
the 1/4” Out of the ARMD to the 1/4” footswitch jack
on the amp you want to control with a standard instrument cable. An
additional 1/4” Out
is provided on the ARMD if you should want to control two of the same amplifiers. The ARMD is phantom powered through the instrument cable from the
footswitch jack on the amplifier, so batteries are not required.
A MIDI foot controller transmits information to remotely control
anything that accepts MIDI program change information. In order to communicate program change information, the MIDI controller
and the ARMD need to be set to the same channel. MIDI channels can
be set on the ARMD by accessing six internal DIP switches via the
removable back door.
|
