The BT-1’s high voltage gain circuit is like adding two extra hot valve stages to your amp so, unlike with inferior battery powered products, you don’t lose any precious dynamics or tone. Add to this an all-valve cut and boost tone section an a high level output which is specially designed to drive your valve amp hard and it all adds up to the ultimate boost pedal available.

• Genuine valve design
• Operates at 300V HT
• Cascaded valve gain stages
• Hot-rod your valve amp
• Silent switching operation
• All-valve tone control circuit
• Pedals or ‘hot’ valve amplifier outputs
• High integrity buffered bypass
• Power supply included
• Silent switching

The OD-1 has dual cascaded, high voltage, triode stages which deliver gain from warm boost to screaming valve saturation. The unique ‘A-Class’ tone control cuts the fizz without making your ‘backed-off’ tone sound dull and lifeless. Add to this a no compromise speaker emulated output and you have the ultimate overdrive dream.

• Genuine valve design
• Operates at 300V HT
• Cascaded valve gain stages
• Responds like a valve amp
• Unique ‘A-Class’ tonecontrol
• Fully equipped for stage or studio
• Speaker emulated output
• High integrity buffered bypass
• Power supply included
• Silent switching

By allowing infinite adjustment over the characteristics of the DS-1’s tone control network, the Patent-Applied-For ISF circuit allows you to effectively design your own tone and find the sound in your head. Add to this the dynamics of the high voltage valve design and a no compromise speaker emulated output and this pedal is a classic amongst modern distortions.

• Genuine valve design
• Operates at 300V HT
• Cascaded valve gain stages
• Responds like a valve amp
• Unique enhanced tone controls
• Exclusive Infinite Shape Feature (ISF)
• Fully equipped for stage or studio
• Speaker emulated output
• High integrity buffered bypass
• Power supply included
• Silent switching

The DX-1 is a no compromise, ultra high gain, filth machine. The tone has been benchmarked against the best high-gain valve amps in the world and will transform your mild mannered classic into a fire breathing monster. The Patent- Applied-For ISF control takes you from ‘Classic British’ to ‘Modern American’ and anywhere in between and the no compromise speaker emulated output lets you get it all down to tape or disk.

• Genuine valve design
• Operates at 300V HT
• Cascaded valve gain stages
• Responds like a valve amp
• Unique enhanced tonecontrols
• Extreme gain and tone
• Exclusive Infinite Shape Feature (ISF)
• Fully equipped for stage or studio
• Speaker emulatedoutput
• High integrity buffered bypass
• Power supply included
• Silent switching

The DS-2 offers the ultimate in high voltage valve distortion flexibility. Channel 1 has either Clean or Crunch modes so it can be used clean, as a boost or overdrive. Channel 2 gives distortion tones from super crunch right up to screaming lead. The unique switching operation will transform a single channel vintage amp into a three channel tone machine. The Patent-Applied-For ISF control takes you from ‘British Valve’ to ‘Modern American’ and anywhere in between and the no compromise speaker emulated output lets you get it all down to tape or disk.

• Genuine valve design
• Operates at 300V HT
• Cascaded valve gain stages
• Responds like a valve amp
• 2 channel operation
• Clean, Crunch & Lead modes
• Unique switching operation
• Unique enhanced tone controls
• Exclusive Infinite Shape Feature (ISF)
• Fully equipped for stage or studio
• Speaker emulated output
• High integrity buffered bypass
• Power supply included
• Silent switching