|
|
 |
 |
 |
|
 |
 |
 |
 A
half-stack's nightmare! Designed for ultimate flexibility,
this revolutionary fully loaded 100 watt modular tube combo provides
easy mobility without sacrificing the punchy tone of a closed back
cabinet. Because it’s an MTS series amp and can be loaded with
any number of tube preamps, we had to design a cabinet that would work
well for both rock and metal, as well as spankin' country and blues.
To do this we designed the amp with a dual back option. The amp
comes from the factory basically sealed giving you the punch and
tightness of a closed 2 x 12, but it also includes a 1/3 removable
top panel to achieve the looser, more boomy low end found in traditional
semi-open back combos.
Don’t get us wrong, this seriously powerful combo was designed
to rock, but it will definitely dish out serious tone across each
genre of music.
Features:
- 3 module
- 2 x 12" design with 2 16 Ohm Celestion
G12T-75s
- 100 watts
- New for 2006 - 6L6 power tubes
- Master volume
- Master density & presence
- MIDI in/thru
|
- Tube buffered parallel effects loops with front panel mix
control
- Series effects loop
- Rear panel bias test points
- Slave output
- Includes 3 button MIDI foot controller
- World voltage AC input selector (100/120/220/240)
|
|
 |
A
Workingman's Dream! The revolutionary RM50B modular combo provides
the flexibility to have any combination of classic to modern tones,
simply by plugging in your choice of preamp modules.
Perfect
for the weekend warrior, club professional, or studio pro who is
looking for an
all tube amplifier with multiple tones. It's
now possible to build your own personal custom rig with say, a
classic Fender® tone, and a hot rodded Marshall® tone in
one amp. We'll let you choose the tones with the new RM50B Modular
combo.
Also available with factory preloaded modules as the RM50B2 -
Blackface & Plexi
- 2 module
- 1
x 12" design with 16 Ohm
Celestion G12T-75
- 50 watts 6L6 tube
- Master volume
- Master
density & presence
|
- Spring reverb
- Tube buffered parallel effects loops with front panel mix
control
- Series effects loop
- Rear panel bias test points
- World voltage AC input selector (100/120/220/240)
|
|
|
Small
but mighty! Continuing to build on the success of the highly
flexible MTS Tube Series, Randall introduces the RM20 modular tube
combo. Built specifically for the professional gigging and recording
musician, this EL84 powered combo performs equally well on stage or
in the studio.
Featuring a single modular channel with a footswitchable tube boost, the
RM20 can take a lower to mid-gain module from pristine clean to sustaining
lead tone at the click of a switch by simply activating the included tube
boost function. Use the tube boost gain control to add a desired amount
of additional saturation then adjust the boost level control for the desired
boost volume.
For all modules, especially the higher gain tones, the tube boost function
can be used as a volume boost without adding additional saturation by simply
rolling out the boost gain and adjusting the amount of boost volume.
For studio use the RM20 features the XLR “Mic Eliminator”direct
output circuit as well as a speaker on/off “Standby”switch
for silent recording to lay down real authentic tube guitar tracks without
disturbing the neighbors. This combo can be ordered with any combination of 13 tube preamp modules,
providing an extremely wide-range of vintage to modern tube amp tones.
- Single modular channel
- 15 watts
- Ruby EL84 power tubes
- 12”Celestion® GreenbackTM
speaker
- Master “Density”& “Presence”controls
- Footswitchable Tube Boost function
- “Boost Gain”control
for desired distortion
|
- “Boost Level”control
to adjust the boost volume
- Dual
function “Standby”switch
for live and silent mode
- Series effects loop
- XLR “Mic Eliminator”direct
output
- 8/16 ohm ext. speaker output
- Slave output
- Rear panel power tube bias test points.
- World voltage AC input selector (100/120/220/240)
|
|
|
