|
|
 |
 |
 |
| G3 Series Heads |
 |
|
 |
 |
| RH300G3 |
300 Watt
head with new "Valve-Dynamic" power
2 channels w/3 modes
Gain 1: Classic hi-gain
Gain 2: Modern hi-gain
Voicing and Contour controls.
Clean channel w/boost option
|
Dual 3-band EQ's,
12AT7 tube driven MOSFET power circuit
Spring reverb
Effects loop w/level controls
Line out
RF4G3 foot controller included |
|
 |
| RH150G3 |
150 Watt
head with new "Valve-Dynamic" power
2 channels w/3 modes
Gain 1: Classic hi-gain
Gain 2: Modern hi-gain
Voicing and Contour controls.
Clean channel w/boost option
|
Dual 3-band EQ's,
12AT7 tube driven MOSFET power circuit
Spring reverb
Effects loop w/level controls
Line out
RF4G3 foot controller included |
|
The
Power of Valve-Dynamic™.
Breaking the tone barrier
between Tube and FET has been a challenge to most amp designers for
a long time. But, during the recent development
of the new V2 and T2, we made several ground breaking discoveries that
allowed us to narrow in as to why tube power reacts and feels so much differently
than a traditional solid-state power amp. Those discoveries, as you’ll
hear this year, resulted in the revolutionary new “Valve-Dynamic™”power
section.
Incorporating a single 12AT7 tube to drive a large Mosfet output circuit,
this highly advanced power circuit has a natural compression which
clips extremely soft at higher volumes reacting very much like a traditional
power tube. The key or secret to this new circuit however, was
capturing or emulating the true frequency response curve of a standard
power tube which has very unique characteristics to that of solid-state
power amp. Our new Valve-Dynamic circuit not only captures
a tubes reactive qualities, but also the warmth, feel, and musical
character
of full tube power amp, but with the durability of a 400 watt Mosfet
power amplifier.
Not only is Valve-Dynamic™ power found in the
new G3 series products but also the V2 and T2 models.
|
|
